The front power bumper is made of 3 mm and 6 mm steel.
The spars are made of 6 mm steel, the bumper body and stiffeners are made of 3 mm steel, and the towing eyes are made of 12 mm steel.

In the wings, the stiffeners are made according to the type of aircraft wing.
The front power bumper is attached to the frame via a "breaking subframe"system. The subframe is made shortened, which allows you to service the winch without removing the front power bumper.

It is sandblasted, painted with zinc primer,
and the second layer-thermosetting black powder paint.

Front power bumper weight: 25 kg

For those who need to lighten the weight of the car, we have started to produce aluminum bumpers.

The front power bumper perfectly complements the appearance of an expensive, but very austere-looking car. The front power bumper has a more developed protection of the wings, fasteners for the winch and additional fog lights. The Highback stops and towing eyes are decorated in the defender style.

The front power bumper is made of 4mm aluminum. Spars and stiffeners are made of 6 mm aluminum. Towing eyes are made of 18mm aluminum.
In the wings, the stiffening ribs are made according to the type of aircraft wing. The front power bumper is attached to the frame via a "breaking subframe"system.The subframe is made shortened, which allows you to service the winch without removing the front power bumper.

It is sandblasted, painted with zinc primer,
and the second layer-thermosetting powder paint of black color.

Front power bumper weight: 35 kg

Front power bumper for Land Rover Defender with removable kangaroo.

The front power bumper perfectly complements the appearance of an expensive, but very austere-looking car. The front power bumper has a more developed protection of the wings, fasteners for the winch and additional fog lights. The Highback stops and towing eyes are decorated in the defender style.

The front power bumper is made of 3 mm and 6 mm steel. The spars are made of 6 mm steel, the bumper body and stiffeners are made of 3 mm steel, and the towing eyes are made of 12 mm steel. In the wings, the stiffening ribs are made according to the type of aircraft wing. The front power bumper is attached to the frame via a "breaking subframe"system.The subframe is made shortened, which allows you to service the winch without removing the front power bumper.

It is sandblasted, painted with zinc primer,
and the second layer-a thermosetting powder paint of black color.

Front power bumper weight: 45 kg

When designing the rear power bumper for this car, we did not go away from the classic angular style. At the same time, it becomes quite clear that you are looking at an expensive, functional, English car. Rivet caps, which abound on the surface of the rear power bumper, emphasize its belonging to the brand. Now it is certainly not confused, as sometimes happens with Defenders, with the UAZ.

The body of the rear power bumper is 4 mm thick, the eyelets are 12 mm thick, and all power elements are 6 mm thick. The rear power bumper is perfectly adapted for a sports car: there are reliable high-Back stops and powerful eyelets. If you are not fighting off-road for places on the podium, and go out to nature for fun, spending most of your time in the metropolis, this bumper on your car is perceived as a chic accessory for a utilitarian car, and the attachment under the towbar will only add functionality to your solid car.

The cost of the rear power bumper is shown without the cost of the gate.

It is sandblasted, painted with zinc primer,
and the second layer-a thermosetting powder paint of black color.

The weight of the rear bumper strength: 40 kg

When designing the rear power bumper for this car, we did not go away from the classic angular style. At the same time, it becomes quite clear that you are looking at an expensive, functional, English car. Rivet caps, which abound on the surface of the rear power bumper, emphasize its belonging to the brand. Now it is certainly not confused, as sometimes happens with Defenders, with the UAZ.

The body of the rear power bumper is 4 mm thick, the eyelets are 12 mm, and all power elements are 6 mm. The rear power bumper is perfectly adapted for a sports car: there are reliable high-Back stops and powerful eyelets. If you are not fighting off-road for places on the podium, and go out to nature for fun, spending most of your time in the metropolis, this bumper on your car is perceived as a chic accessory for a utilitarian car, and the attachment under the towbar will only add functionality to your solid car.

A strong gate in both closed and open positions securely holds the spare wheel.

It is sandblasted, painted with zinc primer,
and the second layer-a thermosetting powder paint of black color.

The weight of the rear bumper strength: 35 kg

The spare wheel mounting gate is made of 4 mm thick steel, the triangle and lock are made of stainless steel.

It is possible to install a high-Jack on the gate.

It is sandblasted, painted with zinc primer,
and the second layer-a thermosetting powder paint of black color.

Weight: 15 kg

Power thresholds installed on this car, along with power bumpers, surround the body as well as a solid frame frames the canvas of a famous painter.

Power thresholds have not only a protective and aesthetic function. They make it easier for passengers to Board and disembark.

They withstand lifting the machine by the Hyjek.

Power thresholds are sandblasted, painted with zinc primer, and the second layer is thermosetting black powder paint.

For those who need to lighten the weight of the car, we have started to produce aluminum power thresholds.

The power thresholds installed on this car, along with the power bumpers, surround the body just as a solid frame frames the canvas of a famous painter.

Power thresholds have not only a protective and aesthetic function. They make it easier for passengers to Board and disembark.

They withstand lifting the machine by the Hyjek.

Aluminum power thresholds are sandblasted, painted with a zinc primer, and the second layer is a thermoactive black powder paint.

Power thresholds have not only a protective and aesthetic function.
Facilitate the boarding and disembarkation of passengers, for which the power thresholds are set pads of corrugated aluminum, eliminates the possibility of slipping when getting on and off, in the same style with lining on the door.

The power thresholds from the KDT can withstand the lifting of the car by the Hyjek.

They are sandblasted, painted with zinc primer,
and the second layer-a thermosetting powder paint of black color.

Power thresholds have not only a protective and aesthetic function.
Facilitate the boarding and disembarkation of passengers, for which the power thresholds are set pads of corrugated aluminum, eliminates the possibility of slipping when getting on and off, in the same style with lining on the door.

Sometimes we are asked whether the power thresholds from the KDT can withstand the lifting of the car by the Hyjek. Look at the following images and answer this question yourself.

Aluminum power thresholds are sandblasted, painted with a zinc primer, and the second layer-with a thermosetting black powder paint.

To protect the bottom, frame and transmission parts, we produce special protection. It protects everything up to the radiator, extending from the front bumper to the transfer case. The edges of the protection sheets are bent so that they do not pile up dirt and do not catch on the protrusions of the surface on which the car is moving.

The bottom protection is made of 6mm aluminum sheet of AMG brand.

Painting the protection with black powder paint +2000 rub.

The bottom protection kit consists of three elements. Gas tank protection is sold separately. Price +15,000 rub.

Comes in blue or black.

The steering rod protection is made of 6mm aluminum. The lower corner is reinforced with an additional angle.

Painting the protection with black powder paint +2000 rub.

Protection protects the steering rod.
Made of 5mm steel.
Additional stiffening ribs make it much stronger than its Western counterparts.

Weight: 6 kg

Our branded products that are branded with our logo.
There are no analogues in the world.

Material-steel.

They are sandblasted, painted with a zinc primer, and the second layer is a thermosetting black powder paint.

The protection of the side windows is made with the possibility of placing GERI expedition canisters, which can be used as sandtraks.

Material-steel.

They are sandblasted, painted with a zinc primer, and the second layer is a thermosetting black powder paint.

The protection of the side windows is made with the possibility of placing GERI expedition canisters, which can be used as sandtraks.

It is sandblasted, painted with zinc primer, and the second layer is thermosetting powder paint of black color.

It is sandblasted, painted with a zinc primer, and the second layer is a thermosetting black powder paint.

Side window protection protects the glass from damage (branches, stones) when driving in off-road conditions.
Window protection is made of 2 mm steel, painted with black powder paint.
It is equipped with an installation kit.

It is sandblasted, painted with zinc primer,
and the second layer-thermosetting black powder paint.

Set: 2 PCs.

Protection of the rear windows protects the glass from damage (branches, stones) when driving in off-road conditions.

The protection of the rear windows is made of 2 mm steel, powder-painted black. It is equipped with an installation kit.

It is sandblasted, painted with zinc primer, and the second layer is thermosetting powder paint of black color.

Set: 3 PCs.

Window protection protects the glass from damage (branches, stones) when driving in off-road conditions.

Window protection is made of 2 mm steel, painted with black powder paint. It is equipped with an installation kit.

Sold with a set of 2 PCs.

It is sandblasted, painted with zinc primer, and the second layer is thermosetting powder paint of black color.

Set: 3 PCs.

The protection of the wings is provided with height and length adjustments.

The protection of the wings is combined only with our roads

It is sandblasted, painted with a zinc primer, and the second layer is a thermosetting black powder paint.

The rear optics protection for Land Rover Defender 90/110 is made of stainless steel. It is painted black with powder paint.

The price is for a set of six pieces.

It is sandblasted, painted with a zinc primer, and the second layer is a thermosetting black powder paint.

Set: 6 PCs.

Front optics protection is suitable for KDT front power bumpers for Land Rover Defender 90/110 vehicles.

Made of stainless steel.

It is sandblasted, painted with a zinc primer, and the second layer is a thermosetting black powder paint.

The ladder is installed on the left side of the rear.

It is sandblasted, painted with a zinc primer, and the second layer is a thermosetting black powder paint.

The walls and fins of the fuel tank are made of 2mm stainless steel.
There are stiffeners inside the fuel tank.
It is delivered without protection.

The price of the fuel tank is indicated without the installation kit.

It is sandblasted, painted with zinc primer, and the second layer is thermosetting powder paint of black color.

Fuel tank capacity: 50 liters

The walls and fins of the fuel tank are made of 2mm stainless steel.
There are stiffeners inside the fuel tank.
It is delivered without protection.

The price of the fuel tank is indicated with the installation kit.

The installation kit includes-the second neck, fuel intake, transfer pump, fuel indicator, hoses, clamps, and a quad.

It is sandblasted, painted with zinc primer, and the second layer is thermosetting powder paint of black color.

Fuel tank capacity: 50 liters

The fuel tank of increased capacity is installed instead of the regular one.
The walls and fins of the fuel tank are made of 2mm stainless steel. There are stiffeners inside the fuel tank.

It is ideally combined with KDT power bumpers.

It is sandblasted, painted with a zinc primer, and the second layer is a thermosetting black powder paint.

Fuel tank capacity: 138 liters
Weight: 45 kg

The fuel tank of increased capacity is installed instead of the regular one. The walls and fins of the fuel tank are made of 2mm stainless steel. There are stiffeners inside the fuel tank.

It is sandblasted, painted with a zinc primer, and the second layer is a thermosetting black powder paint.

Fuel tank capacity: 105 liters
Weight: 45 kg